High Quality Stainless Steel Filters Fitted With Genuine Doulton®
Cleanable Ceramic Cartridges For Economical Absolute Sub-Micron
Filtration - A Practical Alternative to Costly Throw-Away membranes!
The Doulton ceramic cartridge membrane offers both;
absolute dead-end filtration and depth filtration.
Far more economical absolute micro-filtration than any thin film poly-carbonate, polyester or teflon®
dead-end membrane or throw-away depth filtration membrane made of PVC, PVDF, PTFE, cellulose,
nylon, polyethersulfone, polypropylene. For more details on how Doulton's ceramic micro-filtration works>>
The ceramic cartridge is less expensive no matter what you pay for it than any absolute membrane because it can be cleaned and reused over 50 times. Unlike the man-made materials used in dead-end and depth filter membranes, Sterasyl® have pure silver through-out the ceramic shell preventing bacterial growth.
HSS4 to HSS20
Four & Five Round Commercial and Industrial Water Purification Systems
We stock a complete
line of four and five round models for flow rates to 20/76 GPM/LPM
in 316L stainless steel; band clamp. Knife edge seal at both cartridge
ends to eliminate by-pass. Standard
pipe fittings are 2" NTP, with flange, BSP, grooved and sanitary
connections available. Electro-polishing or passivation can be
provided by special order. Protective poly-coat over stainless
steel is standard finish.
Pipe fittings readily accessible
for easy installation. Mounting
brackets to secure housings to floor, skid or platform are available.
Tabs come complete with L-brackets, bolts and nuts, and may be
installed at installation site.
The
flow rate is based on clean ceramic cartridges. Flow rate varies
with other cartridges. To see
the ceramic cartridge operating conditions in pdf format
>>
Features
- Designed for industrial and commercial filtration needs
- Heavy-duty stainless steel construction for durability
- Band clamp closures for quick cartridge change-out
- Knife edge seal at both cartridge ends to eliminate by-pass
- Standard housings accept double-open-end cartridges
- Adapters for cartridges with 222, 226 and fin ends available
- Electro-polishing available for increased resistance to corrosion
- Adjustable top plate for more cartridge options
- Mounting tabs, legs & custom fittings available by special order
|
|
Specifications and Pricing
| Model |
No,
of 9-3/4" X 2" cartridges required |
Pipe
size |
Flow
rate GPM/LPM |
Shipping
weight lb/kg |
Price
in USD |
|
| HSS-5X1
|
5 |
2"
NPT |
5/19 |
26/11.8 |
1004.00
|
|
| HSS-4X2
|
8 |
2"
NPT |
8/30 |
31/14
|
1261.40
|
|
HSS-5X2* |
10 |
2"
NPT |
10/38 |
36/16.3 |
1408.00 |
|
| HSS-4X3
|
12 |
2"
NPT |
12/45 |
38/17.2
|
1544.60
|
|
| HSS-4X4
|
16 |
2"
NPT |
16/61 |
45/20.5
|
1882.20
|
|
| HSS-5X4
|
20 |
2"
NPT |
20/76 |
53/24
|
2266.00
|
|
| TABS |
Mounting
tabs kit, complete with L-brackets, bolts and nuts, |
39.00
|
|
| CT-S |
Doulton
silver impregnated ceramic cartridge |
68.50
|
|
| CT-S-25
|
Case
of cartridges (25) $44.90 ea. Shipping wt. 18/8 lb/kg |
1120.50
|
|
*Call for stock availability. Toll free in US 1.888.664.3336 all others +1.248.258.5500
Housing shipped empty with the cartridges weight included into your total shipping weight.The ceramic cartridges are shipped separately FOB Michigan.
| |
Dimensions |
| Model |
A |
B |
C |
D |
| HSS-5X1 |
19.5" |
7" |
3" |
10.5" |
| HSS-5X2 |
29.5" |
7" |
3" |
10.50" |
| HSS-4X2 |
29.5" |
7" |
3" |
10.5" |
| HSS-4X3 |
39.5" |
7" |
3" |
10.5" |
| HSS-4X4 |
49.5" |
7" |
3" |
10.5" |
| HSS-5X4 |
49.5" |
7" |
3" |
10.5" |
NOTE:
For filters operating conditions follow the ceramic cartridge
conditions and specifications>>
Clean cartridges at 35/2.5 psi/bars. Change cartridges when diameter reaches 1.75/45 inch/mm or approximately 50-60 clean out. Service log and 5 µm pre-filter highly recommended.
|
Spare Parts
| Part Number |
Description |
Part Number |
Description |
| 8017-B |
Shell gasket, Buna-N |
8110-5-S |
Hold down plate, 5 round, DOE, 316 |
| 8017-EPR |
Shell gasket, EPDM |
3014-S-12 center rod 1X4 round; 3016-S-12 center rod 1X5 round |
| 8017-T |
Shell gasket, Teflon |
3014-S-22 center rod 2X4 round; 3016-S-22 center rod 2X5 round |
| 8017-V |
Shell gasket, Viton |
3014-S-32 center rod 3X4 round; 3016-S-32 center rod 3X5 round |
| 8005-S |
Cover clamp |
3014-S-42 center rod 4X4 round; 3016-S-42
center rod 4X5 round |
|
8006 |
T-bolt for lid clamp |
Options (Order code) |
Description |
| 8002-S |
Head cover, 304 |
ML |
Mounting legs (must order with flanges) |
| 8002-S-316 |
Head cover, 316 |
SD-1/2 |
1/2" sanitary drain, pair |
| 8050-S |
V-post, 1 high, 316 |
SV-1/2 |
1/2" sanitary vent, each |
| 8051-S |
V-post, 2 high, 316 |
SF-2-316 |
2" sanitary fitting, 316 pair |
| 8052-S |
V-post, 3 high, 316 |
GF-2-316 |
2" grooved fitting, 316 pair |
| 8053-S |
V-post, 4 high, 316 |
BSP-2-316 |
2" BSP, 316 pair |
| 8011-S-316 |
1/2" drain plug, 316 (2 required) |
FF-2-316 |
2" flange fittings, 316 pair (must order legs) |
| 2103-S-316 |
1/4" vent plug, 316 |
FNPT-2 |
2" female NPT pipe fittings, pair |
| 8019 |
Knob, 3/8" (for 4 rounds) req. one |
FF-1.5-316 |
1-1/2" flange fittings, 316 (must order legs) |
| SA |
Spring assembly, 222, 226 |
EP-4/5 |
Electro-polishing, 4 & 5 round models |
| 8110-4-S |
Hold down plate, 4 round, DOE, 316 |
P-4/5 |
Passivation, 4&5 round |
Note:
Information
and recommendations contained in this bulletin are believed
to be reliable. User is responsible to determine suitability.
The
single and
double element modules are ideal for larger pilot plant
studies, either on site, or within a laboratory environment.
Scale up from this modules is linear, therefore negating
extensive installation of larger plant for verification
of performance and applications.
|
Commercial and industrial water purification systems home page>>
1/3.8, 2/7.6 and
3/11.5 GPM/LM flow rate* water filters>>
7 round filters with 14/53 to 28/106 GPM/LPM flow rate>>
12 round filters with 24/91
to 48/182 GPM/LPM flow rate>>
22 round filters with 66/250 to 88/334 GPM/LPM>>
36 round filters with 108/410 to 144/547 GPM/LPM>>
52 round filters with 156/592 to 208/790 GPM/LPM available, call for quote.
Custom and higher flow rate can be attained by mix and match filters in parallel.
Teflon
is a registered trademark of E.I. du Pont de Nemours and Company, Inc
Residential Water Treatment Systems
High Quality Stainless Steel Industrial Water Filters
Commercial Kitchens Equipment
British Berkefeld Portable Gravity Water Purifiers
Boats/RV Fresh Water Systems
Other Doulton Ceramic Filter Applications
Faucets for Water Filters
Filter Replacement Ceramic Candles and Cartridges
Terms and Conditions of Sale
|
