High Quality Stainless Steel Filters Fitted With Genuine Doulton®
Cleanable Ceramic Cartridges For Economical Absolute SubMicron Filtration - A Practical Alternative to Costly Throw-Away membranes!
The ceramic cartridge membrane offers both;
absolute dead-end filtration and depth filtration. Far more economical absolute micro-filtration than any thin film poly-carbonate, polyester or teflon®
dead-end membrane or throw-away depth filtration membrane made of PVC, PVDF, PTFE, cellulose,
nylon, polyethersulfone, polypropylene. For more details on how Doulton's ceramic micro-filtration works>>
The ceramic cartridge is less expensive no matter what you pay for it than any absolute membrane because it can be cleaned and reused over 50 times. Unlike the man-made materials used in dead-end and depth filter membranes, Sterasyl® have pure silver through-out the ceramic shell preventing bacterial growth.
HSS7 to HSS28
Seven Round Models
We stock a complete
line of seven round models for flow rates to 28/106 GPM/LPM
in 316L stainless steel; band clamp. Knife edge seal at both cartridge
ends to eliminate by-pass. Standard pipe fittings are 2" NTP, with flange, BSP, grooved and sanitary
connections available. Electro-polishing or passivation can be
provided by special order. Protective poly-coat over stainless
steel is standard finish.
Pipe fittings readily accessible
for easy installation. Mounting brackets to secure housings to floor, skid or platform are available.
Tabs come complete with L-brackets, bolts and nuts, and may be
installed at installation site.
The
flow rate is based on clean ceramic cartridges. Flow rate varies
with other cartridges. To see
the ceramic cartridge operating conditions in pdf format >>
Features
- Designed for industrial and commercial filtration needs
- Heavy-duty stainless steel construction for durability
- Band clamp closures for quick cartridge change-out
- Knife edge seal at both cartridge ends to eliminate by-pass
- Standard housings accept double-open-end cartridges
- Adapters for cartridges with 222, 226 and fin ends available
- Electro-polishing available for increased resistance to corrosion
- Adjustable top plate for more cartridge options
- Mounting tabs, legs & custom fittings available by special order
|
Adjustable top plate
|
Specifications & Pricing
|
Model |
No, of 9-3/4" X 2" cartridges required |
Pipe size |
Flow rate GPM/LPM |
Shipping*
weight lb.
|
Price in USD |
|
|
HSS-7X1 |
7 |
2" NPT |
7/27 |
36 |
1493.00 |
|
|
HSS-7X2 |
14 |
2" NPT |
14/53 |
51 |
1991.20 |
|
|
HSS-7X3
|
21
|
2" NPT |
21/80 |
63
|
2446.80
|
Call for stock availability. Toll free in US 1.888.664.3336 all others +1.248.258.5500 |
|
HSS-7X4
|
28
|
2" NPT |
28/106
|
66**
|
2972.40
|
|
TABS |
Notes:
Mounting tabs must be installed during manufacturing on 7 round models |
39.00
|
|
|
CT-S |
Doulton silver impregnated ceramic cartridge |
68.50
|
|
|
CT-S-25
|
Case of cartridges (25) $44.90 ea. |
1120.50
|
|
*Housing
shipped empty with the cartridges weight included into your total shipping weight.
**Housing shipped empty F.O.B. factory, USA. The ceramic cartridges are shipped
separately F.O.B. Michigan, USA or UK, which ever is closer to destination.
Shipping cost will be confirmed prior shipping.
| |
Dimensions |
| Model |
A |
B |
C |
D |
| HSS-7X1 |
19.75" |
7.4375" |
2.75" |
12.5" |
| HSS-7X2 |
29.75" |
7.4375" |
2.75" |
12.5" |
| HSS-7X3 |
39.75" |
7.4375" |
2.75" |
12.5" |
| HSS-7X4 |
49.75" |
7.4375" |
2.75" |
12.5" |
NOTE:
For filters operating conditions follow the ceramic cartridge
conditions and specifications>>
Clean cartridges at 35/2.5 psi/bars. Change cartridges when diameter reaches 1.75/45 inch/mm or approximately 50-60 clean out. Service log and 5 µm pre-filter highly recommended. |
Spare
Parts
| Part Number |
Description |
Part Number |
Description |
| 10017-B |
Shell gasket, Buna-N |
8110-5-S |
Hold down plate, 7 round, DOE, 316 |
10017-EPR |
Shell gasket, EPDM |
3014-S-12 center rod 1 high (2 required) |
10017-T |
Shell gasket, Teflon |
3014-S-22 center rod 1 high (2 required) |
10017-V |
Shell gasket, Viton |
3014-S-32 center rod 1 high (2 required) |
10008-S |
Cover clamp |
3014-S-42 center rod 1 high (2 required) |
8006 |
T-bolt for lid clamp |
Options (Order code) |
Description |
10001-S |
Head cover, 304 |
ML |
Mounting legs (must order with flanges) |
10001-S-316 |
Head cover, 316 |
SD-1/2 |
1/2" sanitary drain, pair |
8050-S |
V-post, 1 high, 316 |
SV-1/2 |
1/2" sanitary vent, each |
8051-S |
V-post, 2 high, 316 |
SF-2-316 |
2" sanitary fitting, 316 pair |
8052-S |
V-post, 3 high, 316 |
GF-2-316 |
2" grooved fitting, 316 pair |
8053-S |
V-post, 4 high, 316 |
BSP-2-316 |
2" BSP, 316 pair |
8011-S-316 |
1/2" drain plug, 316 (2 required) |
FF-2-316 |
2" flange fittings, 316 pair (must order legs) |
2103-S-316 |
1/4" vent plug, 316 |
FNPT-2 |
2" female NPT pipe fittings, pair |
8019 |
Knob, 3/8" (for 4 rounds) req. one |
FF-1.5-316 |
1-1/2" flange fittings, 316 (must order legs) |
SA |
Spring assembly, 222, 226 |
EP-7 |
Electro-polishing 7 round models |
8110-4-S |
Hold down plate, 4 round, DOE, 316 |
P-7 |
Passivation 7 round |
Note:
Information
and recommendations contained in this bulletin are believed
to be reliable. User is responsible to determine suitability.
The
single and triple
element modules are ideal for larger pilot plant studies,
either on site, or within a laboratory environment. Scale
up from this modules is linear, therefore negating extensive
installation of larger plant for verification of performance
and applications.
|
Commercial
and industrial home page>>
1/3.8, 2/7.6 and 3/11.5
GPM/LM flow rate* water filters>>
Teflon
is a registered trademark of E.I. du Pont de Nemours and Company, Inc |
